Thursday, December 3, 2009

Secondary Flight Controls - Flaps

Secondary Flight Controls
Secondary flight control systems may consist of wing flaps, leading edge devices, spoilers, and trim systems.


Flaps
Flaps are the most common high-lift devices used on aircraft. These surfaces, which are attached to the trailing edge of the wing, increase both lift and induced drag for any given AOA. Flaps allow a compromise between high cruising speed and low landing speed, because they may be extended when needed, and retracted into the wing’s structure when not needed. There are four common types of flaps: plain, split, slotted, and Fowler flaps. [Figure 5-17]

The plain flap is the simplest of the four types. It increases the airfoil camber, resulting in a significant increase in the coefficient of lift (CL) at a given AOA. At the same time, it greatly increases drag and moves the center of pressure (CP) aft on the airfoil, resulting in a nose-down pitching moment.

The split flap is deflected from the lower surface of the airfoil and produces a slightly greater increase in lift than the plain flap. More drag is created because of the turbulent air pattern produced behind the airfoil. When fully extended, both plain and split flaps produce high drag with little additional lift.

The most popular flap on aircraft today is the slotted flap. Variations of this design are used for small aircraft, as well as for large ones. Slotted flaps increase the lift coefficient significantly more than plain or split flaps. On small aircraft, the hinge is located below the lower surface of the flap, and when the flap is lowered, a duct forms between the flap well in the wing and the leading edge of the flap. When the slotted flap is lowered, high energy air from the lower surface is ducted to the flap’s upper surface. The high energy air from the slot accelerates the upper surface boundary layer and delays airflow separation, providing a higher CL. Thus, the slotted flap produces much greater increases in maximum coefficient of lift (CL-MAX) than the plain or split flap. While there are many types of slotted flaps, large aircraft often have double- and even triple-slotted flaps. These allow the maximum increase in drag without the airflow over the flaps separating and destroying the lift they produce.

Fowler flaps are a type of slotted flap. This flap design not only changes the camber of the wing, it also increases the wing area. Instead of rotating down on a hinge, it slides backwards on tracks. In the first portion of its extension, it increases the drag very little, but increases the lift a great deal as it increases both the area and camber. As the extension continues, the flap deflects downward. During the last portion of its travel, the flap increases the drag with little additional increase in lift.

3 comments:

  1. online gamеs cite to pictuгe gаmes rated Dinosaur GamesI.
    You hit thе spacebar to here, such aѕ build a snowman, adorn a tree, еtс.
    Υοu cаn tгy one, or try them all; Fiгefox is not enough,
    if you Wаnt to play games.

    My site - Game

    ReplyDelete
  2. So parentѕ motive to Mac, let us look at few of
    these amаzing games.

    Нere is my ωebsite :: dameunlike.com

    ReplyDelete
  3. Ѕamsung has ωon a majοr battle іn its ongοіng tussle
    with Apρle, the papeг said. Whіle Samsung
    cоntinueѕ to clаim the top spоt іn smartphone saleѕ, Applе іs doing the same with the
    Facе Time apρlіcatiοn аvailable in the market
    lеd tо Apple's market share declining for a second anyway. The $99 Tablet will feature a 7-inch screen, which puts it in competition with its 1024 x 768-pixel resolution. Intel is focusing on smartphones and Tablets.

    Here is my page: may tinh bang

    ReplyDelete